SBZ 628 XXL: pass-through system for windows, doors and curtain walls

• Up to eight spindles for routing or drilling
• Different separating cut strategies from 22.5° to 157.5° (pivoting)
• Additional saw unit from 45° to 135° (tilting)
• Combined notching
• Quick-change systems for tension rollers and clamping plates for atypical profiles
• Mode for manual insertion and clamping of non-stationary profiles.
   

Machine configuration:

• Left loading magazine for automatic production processes
• The routing spindles can be positioned continuously over 360° on the profile bar, and the cutting angle can be adjusted continuously over 360° for machining profiles in various clamping situations
• A generously dimensioned noise abatement enclosure and the easy-access controls and maintenance elements simplify operation
• Machined profiles are placed gently onto the unloading magazine
• Versions customised to meet specific customer requirements can be designed upon request
   

Options:

• Bar lengths up to 10,500 mm
• Expansion options for outfeed of up to 6,000 mm/8,000 mm
• “Full bar" outfeed
• Outfeed of short parts >150 mm
• Cycling short parts (in single bar mode) >50 mm >150 mm
• Round tube machining
• Additional arms in the infeed
• Label printer
• Vapour extractor
• Air conditioner, control cabinet for ambient temperature <35 °C
• Tools
• Saw blades

SBZ 628 XXL
 
Max. profile cross-section (WxH) 320 x 160 / 160 x 320 mm
Min. profile cross-section (depending on gripper position) 30 x 10 mm

Blank bar length 7,600 mm
Finished part length 350-7,600 mm
Short parts (50-150 / 150-350) Optional
 
 
Feed magazine: 
Shortest blank bar length 1,500 mm
Number of swing arms 5 (option for 9)
Mounting positions 10 (above 120 mm 3-5)
 
 
Infeed: 
Servo drive linear
Motorized gripper adjustment Y/Z
Gripper rotation Standard
Residual piece measurement Optional
Residual piece processing fully automatic
 
 
Machining station: 
Axes 5
Router spindles 4 - 8 (servo-assisted)
  
Saw: 
Axes 3 + 3
Saw blades (diameter) 2 (550 mm), optional 650 + 550 mm
Sawing angles 22.5° - 157.5° (pivoting) 45° - 135° (tilting)
Notching Standard (above and behind)
 
 
Outfeed clamping carriages:
 Axes 1
Cycle operation (short parts) Optional
 
 
Outfeed conveyor:
 Lifting station Yes
Number of swing arms 8
Outfeed conveyor width 4,000 mm (can be extended)

Ta kontakt med oss hvis dette skulle være av interesse.